Medlora hearing aids stream phone calls and music over Bluetooth 5.0, and calls are hands-free: the microphones in the aids pick up your voice, so you are not holding the phone to your ear.
Before you start
Charge the hearing aids in the case first. Have both aids on and within arm's reach of the phone. You cannot set them up from a tablet.
iPhone
- Open Settings → Bluetooth and turn Bluetooth on.
- Put both hearing aids in pairing mode, then tap each one when it appears in the list.
- Open the OTC Clarity app, connect both aids, and finish the hearing check.
Android
The steps are the same: pair each aid in Settings → Bluetooth, then connect both in the app. On Android 5.0 or later, calls and media route through the aids.
Everyday use
- Tapping play in a music app sends audio to both aids.
- Answering a call sends audio to both aids; the aid mics pick up your voice.
- Volume and program changes work from the aids themselves, even with the phone in your pocket.
Battery
Battery is up to 22 hours per charge with streaming off, so heavy streaming days are shorter. The case holds more than 3 full charges and recharges over USB-C.
If pairing drops, forget the devices in Bluetooth settings and pair again. New phones and OS updates occasionally need this.





